Configure RADIUS SNMP
About this task
Configure RADIUS SNMP parameters for authentication and session times.
Procedure
- In the navigation pane, expand .
- Select RADIUS.
- Select the RADIUS SNMP tab.
- Select Enable to enable RADIUS SNMP.
- In AbortSessionTimer, type the period after which the session expires in seconds.
- In ReAuthenticateTimer, type the period of time the system waits before reauthenticating in seconds.
- Select AcctEnable to enable RADIUS accounting for SNMP.
- In UserName, type the RADIUS SNMP user name.
- Select Apply.
RADIUS SNMP Field Descriptions
Use the data in the following table to use the RADIUS SNMP tab.
Name |
Description |
---|---|
Enable |
Enables or disables timer authentication on the server. The default is true. |
AbortSessionTImer |
Specifies the allowable time, in seconds, before aborting the RADIUS SNMP server session (30 to 65535). The default is 180. |
ReAuthenticateTimer |
Specifies the time, in seconds, between reauthentications of the RADIUS SNMP server (30 to 65535). The default is 180. |
AcctEnable |
Enables or disables the RADIUS SNMP session timer. |
UserName |
Specifies the user name for the RADIUS SNMP accounting. |